{"product_id":"feuling-race-series-oil-kit-short-lifter-gear-n-chain-harley-m8-oil-cooled-17-up","title":"Feuling Race Series Oil Cooled Oil System Kit for M8 Harley 17-24 Touring","description":"\u003cul class=\"mb-4 mt-2 pl-3\"\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eIncludes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplates\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eIncreases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eFUELING® oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eIncreased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eFUELING® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eFUELING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eQuieter and smoother engine operation\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eIncrease oil pressure, scavenge volume and engine oil flow\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003e42% more scavenge volume with port sizing, matched passages and holes to the engine case\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003e68% more oil volume to the crankshaft and connecting rod bearing\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eEngine temperatures run 15°-25° cooler\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eOil temperatures run 15°-30° cooler\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003e10-30 lbs more psi of oil pressure\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eM-Eight Water-Cooled™ motor oil pump has 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eM-Eight Oil-Cooled™ motor pump has 27% more pressure and scavenge gear volume over stock\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eEliminate wet sumping, blow by and oily air cleaners\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eTest results show 2 horsepower gain and 2 ft.\/lb. of torque gain to the rear wheel on M-Eight\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eIncludes a Race Series® oil pump, Race Series® full-travel or short- travel hydraulic roller lifters, High Flow camplate and cam installation kit, cam bearing, cam\/?crank bolts and washers, engine and fastener assembly lube\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eBillet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eRace Series® oil pumps feature increased scavenge side kidney port volume over HP+ oil pumps\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eRace Series® full-travel hydraulic lifters have a full .200” of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eRace Series® short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eThe travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes\u003c\/li\u003e\r\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eMade in the USA\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Feuling","offers":[{"title":"Default Title","offer_id":42358007562311,"sku":"FMC-7097ST","price":1229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/5953\/2615\/files\/2e7cdb1b-63fa-4a6c-bc62-307aa91bcb9b_0ixidfy85wdef2r4.jpg?v=1767673084","url":"https:\/\/easternperformance.com\/products\/feuling-race-series-oil-kit-short-lifter-gear-n-chain-harley-m8-oil-cooled-17-up","provider":"Eastern Performance Cycles","version":"1.0","type":"link"}