Alpinestars Supertech M10 Jett Lawrence R01 Offroad Helmet

SKU: DS01108991

Alpinestars Supertech M10 Jett Lawrence R01 Offroad Helmet

Only 2 left
SKU: DS01108991
Regular price $919.95
Size

View Size Guide

Alpinestars Supertech Helmets Size Range

Fits SM3, SM7, Supertech M10, Supertech R10 and Supertech R7 helmets.

Size Head Circumference (cm) Head Circumference (inches)
XS 53-54 20.8" - 21.2"
S 55-56 21.6" - 22"
M 57-58 22.4" - 22.8"
L 59-60 23.2" - 23.6"
XL 61-62 24" - 24.4"
2XL 63-64 24.8" - 25.2"

Choosing the Correct Helmet Size

Helmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.

Head Measurement Instructions

How to measure your head for a helmet

Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart above.

Sizing information is provided by the manufacturer and does not guarantee a perfect fit. Please use this chart as a guide only.

⚠ WARNING: Improper helmet fit could contribute to serious injury or death.

The S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column.

Alpinestars Supertech M10 Jett Lawrence R01 Offroad Helmet Features:

  • The S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction
  • The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column
  • A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head
  • Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation
  • The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection
  • Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner
  • Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury
  • MIPS Multi-directional Impact Protection System
  • Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy
  • Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun
  • Eject helmet removal system

Specifications:

  • Available sizes: Small, Medium, Large, X-Large, 2X-Large
  • Type: MX
  • Shell Material: Aramid, Carbon Composite
  • Finish: Gloss
  • Features: MIPS, Removable Cheek Pads, Vented
  • Riding Style: ATV, Off-Road, UTV
  • Gender: Unisex
  • Sold individually
Product Title Store SKU MFR Part #
Small DS01108991 8303325-3144-S
Medium DS01108992 8303325-3144-M
Large DS01108993 8303325-3144-L
X-Large DS01108994 8303325-3144-XL
2X-Large DS01108995 8303325-3144-XXL

Bulk order

Variant Quantity Price Total
Small DS01108991 / 8303325-3144-S
Regular price $919.95
$0.00
Regular price $919.95
$0.00
Medium DS01108992 / 8303325-3144-M
Regular price $919.95
$0.00
Regular price $919.95
$0.00
Large DS01108993 / 8303325-3144-L
Regular price $919.95
$0.00
Regular price $919.95
$0.00
X-Large DS01108994 / 8303325-3144-XL
Regular price $919.95
$0.00
Regular price $919.95
$0.00
2X-Large DS01108995 / 8303325-3144-XXL
Regular price $919.95
$0.00
Regular price $919.95
$0.00
View cart
0 Total items
$0.00

Product subtotal