AF Kustom Electric Motorcycle Center Stand for Harley FLH/T 00-25

AFK Electric Center Stand will fit 2000-2024 Touring Models.  It was designed and will work for cross under exhaust.  Also see first electric center stand with legs motion forwards. AFK Center Stand is compatible with all air ride units.   Sold in Gloss Black finish. Not indended for audio bikes. Must have air ride to install all AFK electric center stands.

AFK Touring Electric Stands comes with two set of leg kits. 90% of our customers utilize Kit #2. All non-rake bikes are Kit#2.

Kit#1- L1 set & L2 set                                         Kit #2- L2 set & L3 set

L3 Height is approximately 3-1/2″/ L3 Leg range with standard pack is approximately 3-1/2″-5″ (measurement  from bolt hole)

L2 Height is approximatley 2-1/2″/ L2 Leg range with standard pack is approximately 2-1/2″-4″

L1 Height is approximatley 1-1/2″/ L1 Leg range with standard pack is approximately 1-1/2″-3″ 

(AFK Touring Electric Center Stand (Standard Pack) comes with three sets of stackable/inserts (shims) and one set of end caps.)

Additional stackable/inserts (shims) may be added.

Here is a list of confirmed stock exhaust that is compatibile with AFK Touring Center Stand: Stock D&D w/ghost pipe, Stock Reinhart, Stock Bassani w/ghost pipe, TAB Performance, & VAN HINES POWER DUALS

Here is a list of confirmed stock exhaust that is compatibile with AFK Touring Center Stand: Stock D&D w/ghost pipe, Stock Reinhart, Stock Bassani w/ghost pipe, TAB Performance, & VAN HINES POWER DUALS

WILL NOT WORK WITH KHROME WERKS HEAD PIPE EXHAUST. KHROME WERKS SLIPS ON ONLY. ALSO WILL NOT WORK WITH PRIMARY BELT DRIVE.

ALTERING  MOTOR, MOTOR WIRE, OR HARNESS VOIDS WARRANTY.

Install Tips 2016 & Down: Loosen the right side that way the stand wiggles in place.  The 2 bolts on the cross bar have to come out.   

Read Here for Specs and More Tips:

• Oil Pan Fasteners Torque 132-156in-lbs 14.9-17.6 N-M
• Some Exhaust Systems Will Require the Slip on to be Removed and Loosen the Header to Get More Clearance for the Stand
• On the 2024 With Stock Headers You Do Not Have to Remove This Right Side Pipe