Give your 78-79 Ford Bronco an aggressive look from front to rear with Rough Country’s 4" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of 7 degree c-bushings and track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Country's premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Country's 4" Ford Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing. Best of all, Rough Country's 4" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.

Features

• Increased ground clearance Levels the front with the rear of the vehicle

Specifications

• Install time: 5-7 hours
• Front components: Lifted coil springs Track bar drop bracket 7° C-bushings Hardware
• Rear components: 3" lift blocks U-bolts Hardware
• Tire info: 35x12.50R15:Factory 15:5x5.5:-:-;33x12.50R16:16x8:5x5.5:+30:-;35x12.50R22:22x10:5x5.5:-19:-;295/55R22:22x10:5x5.5:-19:-;285/55R22:22x10:5x5.5:-19:-;35x12.50R22:22x10:5x5.5:-18:-;295/55R22:22x10:5x5.5:-18:-;285/55R22:22x10:5x5.5:-18:-;35x12.50R22:22x12:5x5.5:-44:Trimming Required
• Manufacturer part number: 450.20

Notes: New rear blocks replace the factory rear block. A drop pitman arm is recommended for optimum turning radius and drag link alignment. (#6602) (#6602) pitman arm will NOT work if the original arm has a welded ball joint on the end. Vehicles with factory quad shocks (2 front shocks per side) will simply use a single aftermarket shock.

Please confirm your exact vehicle, year and trim before ordering.